Data Sheet for Thick Copper Target
26th April 2001
Thicknesses are measured at the 9 points marked t1 to t9.
Four diameters are measured as indicated: at the upstream end, du1 to du4,
at the middle plane, dm1 to dm4, and at the downstream end, dd1 to dd4, of the
cylinder.
| Material |
Copper |
| Purity |
99.99% |
| Nominal thickness |
150.0 mm |
| Thickness (mm) |
t1 150.23 | t2 150.20 |
t3 150.20 | t4 150.20 |
t5 150.18 |
| t6 150.19 | t7 150.18 |
t8 150.175 | t9 150.22 | |
| Diameter (mm) |
du1 30.07 | du2 30.07 |
du3 30.07 | du4 30.07 | |
| dm1 30.08 | dm2 30.09 |
dm3 30.09 | dm4 30.08 | |
| dd1 30.10 | dd2 30.10 |
dd3 30.11 | dd4 30.10 | |
| Mass (g) | 953.64 |
| Derived density | 8.93 g cm-3 |
| Data book density | 8.92 g cm-3 |
| Location |
Centred on z = 0. |
Page maintained by Chris Booth
