Data Sheet for Thick Aluminium Target
26th April 2001
For the very long targets, the thickness could only be measured at point t9.
Four diameters are measured as indicated: at the upstream end, du1 to du4,
at the middle plane, dm1 to dm4, and at the downstream end, dd1 to dd4, of the
cylinder.
| Material |
Aluminium |
| Purity |
99.999% |
| Nominal thickness |
394.4 mm |
| Thickness (mm) |
394.44 |
| Diameter (mm) |
du1 30.06 | du2 30.07 |
du3 30.04 | du4 30.07 | |
| dm1 30.05 | dm2 30.06 |
dm3 30.06 | dm4 30.05 | |
| dd1 30.19 | dd2 30.20 |
dd3 30.20 | dd4 30.19 | |
| Mass (g) | 754.28 |
| Derived density | 2.69 g cm-3 |
| Data book density | 2.70 g cm-3 |
| Location |
Centred on z = 0. |
Page maintained by Chris Booth
